CIP20-DIE is Complete CIP Die Set (Max.278 Mpa Vessel) for 24Tons Cold Isostatic Press. It has a 30mm ID x110mm hydraulic chamber made by ultra-strength alloy, which can provide isostatic hydraulic pressure up to 330 MPa via a 24Thydraulic press. It is an excellent tool for the material research lab to prepare high-density compound sample at easy. 

 

Pressure Vessel Size	30mm Dia. x 110mm Height (pressing die cavity) Max sample height: 60mm Hydraulic oil volume (with sample loaded): 40mm distance to the top edge.  Made of high strength alloy with stainless steel protective jacket
Ma. Hydraulic Pressure in Chamber	330 Mpa ( 43500 PSI)
Hydraulic Machine optional	24 T
Operation Temperature	10 - 40°C
Maximum pressure holding time	8 minutes (The time starts from the press reaches the target pressure value and ends by releasing the pressure)
Application Notes	You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation.  You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order) You may use the machine as a dry pressing to order pressing die (click Pic below right) Pic. 1  Pic. 2 Pic. 3
Warning	Never let the press hold the target pressure be longer than 8 minutes, It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period. Pressure must be completely released first, then make sure the hand wheel and the pressure release valve has been tightened before pressing If you order the die only and using your own press machine, , MTI is not resposnible for the safety