200C Max. Electric Hot Rolling Press (12'' Wide ) with Pressure Control Upto 15T - MSK-H2300-E

MSK-H2300E is an Electric Hot Rolling Press with max. the working temperature of 200°C and Max. the pressure of 15T. The 300mm wide rollers (HRC60) allows the process of various materials such as battery electrodes, plastic media, soft metal, and composite foils. The built-in hydraulic pressure regulating system provides a stable pressure control over the entire calendaring process. It is an ideal tool to increase material density and achieve better surface quality.

MTI has granted the patent 201720537817.1& 201720534495.5 for the Electric Hot Rolling Press MSK-H2300E since December 2017.

SPECIFICATIONS:

Features	Featured patented electrical driven heat able rollers with accurate and uniform temperature control. Upto 200 °C working temperature. PLC control system simplifies HMI. A large touchscreen panel allows the control of pressure, rolling speed, temperature, and data logging. The hydro-pressure regulating system ensures stable pressure during operation. Rolling thickness is adjusted by stepper motors. The optional R2R system enables continuous workflow of sheet rolling out -> calendering -> sheet winding.
Voltage	Three Phase 220VAC +/- 10%, 50/60Hz
Power Consumption	8.5KW
Roller Driving Motor	1KW inverter duty AC motor
Roller Diameter	200 mm
Roller Width	Max. 300 mm
Surface Hardness of Rollers	HRC 60-62 (<5% hardness attenuation when heat up to 200°C) Note: Never roll materials with hardness > 50HRC (this rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.)
Rolling Gap Thickness	0.03 ~ 1.5mm, adjusted by a stepper motor. ( depended on material )
Roller flatness	RMS: ± 1.5μm
Rolling Thickness Accuracy	< ± 1.5μm (Only if the uniformity of the sample is ≤±1.5μm)
Roller Temperature	Max. 200°C PID control with accuracy ≤2±°C
Rolling Speed	0.3 m/min - 4m/min
Max Pressure	Pressure load: 15 Tons max., pressure adjustable by Touch Screen Control Panel Real-time pressure displays with data logging
Roll to Roll System (optional)	MSK-E2300RD R2R system can be integrated with the calendaring machine at extra cost to enable the automatic film unwinding -> winding after calendaring. Please click underline to view product details.
Application Notes	Important announcement (please read this before place the order) Must use acetone to clean rollers' surface after each use Never roll material with hardness > 50HRC If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers The minimum thickness of the rolled sheet should depend on the physical property of the material. Here are some results from our test: Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only)
Compliance	CE Certified NRTL certificate is available upon request at extra cost.
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running. Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Never roll materials with hardness > 50HRC Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness. Never calendaring decrement over 0.02mm comparing with original sheet thickness each calendaring. Heating beyond 200ºC will cause roller deformation may yield results with imperfections. In order to prolong the lifespan of the roller bearings, regular lubrication is recommended. Clean roller surface for each rolling with acetone and lubricate when not in use to avoid corrosion It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).

Product Information

Shipping & Returns

200C Max. Electric Hot Rolling Press (12'' Wide ) with Pressure Control Upto 15T - MSK-H2300-E

Features	Featured patented electrical driven heat able rollers with accurate and uniform temperature control. Upto 200 °C working temperature. PLC control system simplifies HMI. A large touchscreen panel allows the control of pressure, rolling speed, temperature, and data logging. The hydro-pressure regulating system ensures stable pressure during operation. Rolling thickness is adjusted by stepper motors. The optional R2R system enables continuous workflow of sheet rolling out -> calendering -> sheet winding.
Voltage	Three Phase 220VAC +/- 10%, 50/60Hz
Power Consumption	8.5KW
Roller Driving Motor	1KW inverter duty AC motor
Roller Diameter	200 mm
Roller Width	Max. 300 mm
Surface Hardness of Rollers	HRC 60-62 (<5% hardness attenuation when heat up to 200°C) Note: Never roll materials with hardness > 50HRC (this rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.)
Rolling Gap Thickness	0.03 ~ 1.5mm, adjusted by a stepper motor. ( depended on material )
Roller flatness	RMS: ± 1.5μm
Rolling Thickness Accuracy	< ± 1.5μm (Only if the uniformity of the sample is ≤±1.5μm)
Roller Temperature	Max. 200°C PID control with accuracy ≤2±°C
Rolling Speed	0.3 m/min - 4m/min
Max Pressure	Pressure load: 15 Tons max., pressure adjustable by Touch Screen Control Panel Real-time pressure displays with data logging
Roll to Roll System (optional)	MSK-E2300RD R2R system can be integrated with the calendaring machine at extra cost to enable the automatic film unwinding -> winding after calendaring. Please click underline to view product details.
Application Notes	Important announcement (please read this before place the order) Must use acetone to clean rollers' surface after each use Never roll material with hardness > 50HRC If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers The minimum thickness of the rolled sheet should depend on the physical property of the material. Here are some results from our test: Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only)
Compliance	CE Certified NRTL certificate is available upon request at extra cost.
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running. Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Never roll materials with hardness > 50HRC Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness. Never calendaring decrement over 0.02mm comparing with original sheet thickness each calendaring. Heating beyond 200ºC will cause roller deformation may yield results with imperfections. In order to prolong the lifespan of the roller bearings, regular lubrication is recommended. Clean roller surface for each rolling with acetone and lubricate when not in use to avoid corrosion It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).

$52,499.30

Original: $149,998.00

200C Max. Electric Hot Rolling Press (12'' Wide ) with Pressure Control Upto 15T - MSK-H2300-E—

$149,998.00

$52,499.30

Original: $149,998.00

200C Max. Electric Hot Rolling Press (12'' Wide ) with Pressure Control Upto 15T - MSK-H2300-E—

$149,998.00

$52,499.30

Product Information

Shipping & Returns

Description

Features	Featured patented electrical driven heat able rollers with accurate and uniform temperature control. Upto 200 °C working temperature. PLC control system simplifies HMI. A large touchscreen panel allows the control of pressure, rolling speed, temperature, and data logging. The hydro-pressure regulating system ensures stable pressure during operation. Rolling thickness is adjusted by stepper motors. The optional R2R system enables continuous workflow of sheet rolling out -> calendering -> sheet winding.
Voltage	Three Phase 220VAC +/- 10%, 50/60Hz
Power Consumption	8.5KW
Roller Driving Motor	1KW inverter duty AC motor
Roller Diameter	200 mm
Roller Width	Max. 300 mm
Surface Hardness of Rollers	HRC 60-62 (<5% hardness attenuation when heat up to 200°C) Note: Never roll materials with hardness > 50HRC (this rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.)
Rolling Gap Thickness	0.03 ~ 1.5mm, adjusted by a stepper motor. ( depended on material )
Roller flatness	RMS: ± 1.5μm
Rolling Thickness Accuracy	< ± 1.5μm (Only if the uniformity of the sample is ≤±1.5μm)
Roller Temperature	Max. 200°C PID control with accuracy ≤2±°C
Rolling Speed	0.3 m/min - 4m/min
Max Pressure	Pressure load: 15 Tons max., pressure adjustable by Touch Screen Control Panel Real-time pressure displays with data logging
Roll to Roll System (optional)	MSK-E2300RD R2R system can be integrated with the calendaring machine at extra cost to enable the automatic film unwinding -> winding after calendaring. Please click underline to view product details.
Application Notes	Important announcement (please read this before place the order) Must use acetone to clean rollers' surface after each use Never roll material with hardness > 50HRC If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers The minimum thickness of the rolled sheet should depend on the physical property of the material. Here are some results from our test: Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only)
Compliance	CE Certified NRTL certificate is available upon request at extra cost.
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running. Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Never roll materials with hardness > 50HRC Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness. Never calendaring decrement over 0.02mm comparing with original sheet thickness each calendaring. Heating beyond 200ºC will cause roller deformation may yield results with imperfections. In order to prolong the lifespan of the roller bearings, regular lubrication is recommended. Clean roller surface for each rolling with acetone and lubricate when not in use to avoid corrosion It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).