Sodium (Na) Chip with 15.6mm Dia x 0.45mm Thickness for Sodium Ion Battery, 200pcs/bottle - SIB-NaC05

SPECIFICATIONS:

Material	Sodium Metal Composite (Aluminum as support to enhance mechanical strength)
Diameter	15.6 mm
Thickness	0.45 mm
Coatings	Aluminum side is covered by a blue protection membrane and sodium side is covered by a transparent protection membrane.
Packing	Four-layer packaging technology is employed. One side of the sodium sheet is covered with aluminum foil, serving as both a support and current collector while also protecting the sodium. Additionally, both sides are covered with protective films to prevent oxidation. The sodium sheets are then placed in plastic bottles, which are further enclosed in aluminum-plastic bags and finally packaged in iron cans for long-term storage and safety.
Operation	The package must be opened inside a glove box with Argon Gas and moisture less than 2%RH. Open the aluminum bag and take out the whole plastic bottle. After taking a certain amount of sodium chips and tightly close the bottle cap. Using a tweezer with a flat tip to hold the sodium chip to and then remove the protection membranes with a sharp tweezer. Blue and transparent membranes are removed in sequence. During the battery cell assembling, the aluminum side should be faced to the cell case and sodium metal side should be faced to a separator.
Shipping Limitation	Shipments of Sodium chips are described as "UN1428, Sodium, 4.3, PG I". Under Hazard Class 4.3 "Dangerous when Wet". Hazardous Material; Ship within the Continental US and via UPS Ground only.
Note	This product is not manufactured by MTI. We only sell small quantities to research for developing new materials. If you have any questions on IP conflict, we will forward your inquiry to the manufacturer. Video: How to use the split cell Video: How to make a solid-state battery

Product Information

Shipping & Returns

Sodium (Na) Chip with 15.6mm Dia x 0.45mm Thickness for Sodium Ion Battery, 200pcs/bottle - SIB-NaC05

SPECIFICATIONS:

Material	Sodium Metal Composite (Aluminum as support to enhance mechanical strength)
Diameter	15.6 mm
Thickness	0.45 mm
Coatings	Aluminum side is covered by a blue protection membrane and sodium side is covered by a transparent protection membrane.
Packing	Four-layer packaging technology is employed. One side of the sodium sheet is covered with aluminum foil, serving as both a support and current collector while also protecting the sodium. Additionally, both sides are covered with protective films to prevent oxidation. The sodium sheets are then placed in plastic bottles, which are further enclosed in aluminum-plastic bags and finally packaged in iron cans for long-term storage and safety.
Operation	The package must be opened inside a glove box with Argon Gas and moisture less than 2%RH. Open the aluminum bag and take out the whole plastic bottle. After taking a certain amount of sodium chips and tightly close the bottle cap. Using a tweezer with a flat tip to hold the sodium chip to and then remove the protection membranes with a sharp tweezer. Blue and transparent membranes are removed in sequence. During the battery cell assembling, the aluminum side should be faced to the cell case and sodium metal side should be faced to a separator.
Shipping Limitation	Shipments of Sodium chips are described as "UN1428, Sodium, 4.3, PG I". Under Hazard Class 4.3 "Dangerous when Wet". Hazardous Material; Ship within the Continental US and via UPS Ground only.
Note	This product is not manufactured by MTI. We only sell small quantities to research for developing new materials. If you have any questions on IP conflict, we will forward your inquiry to the manufacturer. Video: How to use the split cell Video: How to make a solid-state battery

$798.00

Sodium (Na) Chip with 15.6mm Dia x 0.45mm Thickness for Sodium Ion Battery, 200pcs/bottle - SIB-NaC05—

$798.00

Sodium (Na) Chip with 15.6mm Dia x 0.45mm Thickness for Sodium Ion Battery, 200pcs/bottle - SIB-NaC05—

$798.00

Product Information

Shipping & Returns

Description

SPECIFICATIONS:

Material	Sodium Metal Composite (Aluminum as support to enhance mechanical strength)
Diameter	15.6 mm
Thickness	0.45 mm
Coatings	Aluminum side is covered by a blue protection membrane and sodium side is covered by a transparent protection membrane.
Packing	Four-layer packaging technology is employed. One side of the sodium sheet is covered with aluminum foil, serving as both a support and current collector while also protecting the sodium. Additionally, both sides are covered with protective films to prevent oxidation. The sodium sheets are then placed in plastic bottles, which are further enclosed in aluminum-plastic bags and finally packaged in iron cans for long-term storage and safety.
Operation	The package must be opened inside a glove box with Argon Gas and moisture less than 2%RH. Open the aluminum bag and take out the whole plastic bottle. After taking a certain amount of sodium chips and tightly close the bottle cap. Using a tweezer with a flat tip to hold the sodium chip to and then remove the protection membranes with a sharp tweezer. Blue and transparent membranes are removed in sequence. During the battery cell assembling, the aluminum side should be faced to the cell case and sodium metal side should be faced to a separator.
Shipping Limitation	Shipments of Sodium chips are described as "UN1428, Sodium, 4.3, PG I". Under Hazard Class 4.3 "Dangerous when Wet". Hazardous Material; Ship within the Continental US and via UPS Ground only.
Note	This product is not manufactured by MTI. We only sell small quantities to research for developing new materials. If you have any questions on IP conflict, we will forward your inquiry to the manufacturer. Video: How to use the split cell Video: How to make a solid-state battery