1500C Max 4 Channel Tube Furnace (50mm Alumina Tube) for Hi-Throughput Annealing - GSL-1500X-MGI-4

GSL-1500X-MGI-4 is a compact four channels 50mm O.D. tube furnace for high throughput heat treatment research of alloy and ceramic material up to 1500°C. It is an excellent tool to research the phase diagram in MGI new generation material.

SPECIFICATIONS:

Furnace Structure	The furnace is consistent with four-tube furnace modules with alumina tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1500°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing 4 samples with different temperature at compact space
Heating Element	MoSi2
Working Temperature & Constant Temperature Zone	Continuous Working Temperature 1400°C Maximum Working Temperature 1500°C (< 1 hrs) +/- 10°C @ 1300°C in the center 120mm area
Processing Tube	High purity alumina tube with Φ50X L 460 mm, 4 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Eurotherm 3000 Series Programmable Temperature Controller Includes over-temperature and broken thermal couple alert. 4 channel heating tube is controlled independently by 24 segments programmable temperature controller 4 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
Heating Rate	10 °C/ min Max.
Temperature Accuracy	+/- 0.5°C
Temperature Uniformity	+/- 10°C @ 1300°C in a 120mm zone in length
Power & Working Voltage	12 KW, 208 - 240V single phase, 50/60Hz ( if 4 heating modules operation at the same time ) Three-phase, AC 380V - 460V available upon request. Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.

Product Information

Shipping & Returns

1500C Max 4 Channel Tube Furnace (50mm Alumina Tube) for Hi-Throughput Annealing - GSL-1500X-MGI-4

Furnace Structure	The furnace is consistent with four-tube furnace modules with alumina tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1500°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing 4 samples with different temperature at compact space
Heating Element	MoSi2
Working Temperature & Constant Temperature Zone	Continuous Working Temperature 1400°C Maximum Working Temperature 1500°C (< 1 hrs) +/- 10°C @ 1300°C in the center 120mm area
Processing Tube	High purity alumina tube with Φ50X L 460 mm, 4 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Eurotherm 3000 Series Programmable Temperature Controller Includes over-temperature and broken thermal couple alert. 4 channel heating tube is controlled independently by 24 segments programmable temperature controller 4 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
Heating Rate	10 °C/ min Max.
Temperature Accuracy	+/- 0.5°C
Temperature Uniformity	+/- 10°C @ 1300°C in a 120mm zone in length
Power & Working Voltage	12 KW, 208 - 240V single phase, 50/60Hz ( if 4 heating modules operation at the same time ) Three-phase, AC 380V - 460V available upon request. Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.

$29,985.00

1500C Max 4 Channel Tube Furnace (50mm Alumina Tube) for Hi-Throughput Annealing - GSL-1500X-MGI-4—

$29,985.00

1500C Max 4 Channel Tube Furnace (50mm Alumina Tube) for Hi-Throughput Annealing - GSL-1500X-MGI-4—

$29,985.00

Product Information

Shipping & Returns

Description

Furnace Structure	The furnace is consistent with four-tube furnace modules with alumina tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1500°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing 4 samples with different temperature at compact space
Heating Element	MoSi2
Working Temperature & Constant Temperature Zone	Continuous Working Temperature 1400°C Maximum Working Temperature 1500°C (< 1 hrs) +/- 10°C @ 1300°C in the center 120mm area
Processing Tube	High purity alumina tube with Φ50X L 460 mm, 4 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Eurotherm 3000 Series Programmable Temperature Controller Includes over-temperature and broken thermal couple alert. 4 channel heating tube is controlled independently by 24 segments programmable temperature controller 4 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
Heating Rate	10 °C/ min Max.
Temperature Accuracy	+/- 0.5°C
Temperature Uniformity	+/- 10°C @ 1300°C in a 120mm zone in length
Power & Working Voltage	12 KW, 208 - 240V single phase, 50/60Hz ( if 4 heating modules operation at the same time ) Three-phase, AC 380V - 460V available upon request. Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Warning & Application note	Max pressure of this furnace is 7.5 PSI 0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. Click here to learn the installation of a gas regulator. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.